Tabla de contenido
Publicidad
Step 13
Push the RUBBER SLEEVES (BB) over the remaining METAL PINS (AA). Insert the METAL PINS into the hole locations of
å
your choice in the ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (J) onto the METAL PINS.
To help prevent the TV from sliding, place the ANTI-SKID PAD (Y) under the front support of the TV or divide among the
å
front supports if more than one.
Apply the WARNING LABEL (CC) to the TOP (E). You should be able to read the label when the TV is removed from the
å
unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
www.sauder.com/services
E
Y
J
30 lbs.
B
25 lbs.
50 lbs. total
C
AA
(8 used)
BB
Never use this furniture with a TV that is too
CC
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
95 lbs.
J
25 lbs.
412921
WARNING
A
Page 17
Publicidad
Tabla de contenido
