HAMPTON BAY 847658004017 Guia De Instalacion página 6

Installation (continued)
5
Attaching the track rail
□ Ensure that the ground side of the track rail (E)
(exposed copper wire on top of the track rail) is
facing the ceiling.
□ Align and insert the contacts on the support stems
(D) with the contact channel on the track rail (E),
making sure the "N" line contact inserts into the
upper channel, the "L" line contact inserts into the
lower channel, and the ground tab (1) rests on the
copper ground on top of the track rail (E).
7
Shaping the track
□ Refer to the following figure for recommended
shapes. Do not make any sharp bends in the track.
Do not bend the track more than 90 degrees within a
10 in. portion of the track.
6
Closing the track contacts
□ Close the connector tight and rethread the
decorative collar (C) to lock the track contacts
closed.
6
D
B