Hunter Belle Meade 82023 El Manual Del Propietario página 10

B22 B23
I
I
Reinstall the motor by inserting the tabs and pushing up
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
into position. Make sure the wires are not pinched
HANG FROM THE WIRING HARNESS.
between the motor and the housing.
B24 B25
J
Secure the motor by tightening the 2 screws.
Turn on the power source.
B26 B27
Go to step
O N
E1
O F F on page 17
to attach grille.
Test the motor. If the motor does not run,
check the plug connection.
10
42950-01 09/09/2011