Hunter Belle Meade 82023 El Manual Del Propietario página 7

0 0 0 0
A17
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
A19
J
Secure the motor by tightening the 2 screws.
A21
O N
Test the motor. If the motor does not run, check the plug
connection.
A18
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
A20
A22
O F F
7
42950-01 09/09/2011
0 0 0 0
I
between the motor and the housing.
Turn on the power source.
Go to step
E1
on page 17
to attach grille.