Focus Electrics Back To Basics SIT471LP Manual De Instrucciones página 3

1. Wash machine in warm, soapy water before using. Do not wash in dishwasher.
2. Fill ice cups with water and place in freezer. When frozen solid, loosen ice block
by holding the ice cup in your hand for a few seconds. (Be sure to make extra
ice blocks and store them in the freezer for future use). Ice cubes may also be
used but require more effort to turn the handle.
3. Place an ice block (removed from cup) in the machine. Position the empty ice
cup or small bowl underneath to catch the shaved ice.
4. Put the lid with handle assembly on the machine, press down and twist lid
clockwise until tight. Turn handle clockwise and apply downward pressure to
shave ice and produce "snow."
5. Place "snow" in a paper cone or glass, then add your favorite Back To Basics
Snow Cone syrup or beverage to create your own frosty treat.
6. When ice block is completely shaved, empty out any remaining ice pieces and
add a new ice block to make more shaved ice.
7. After each use, shake out any water or ice particles remaining in the machine. It
is not necessary to wash the machine after using ice made only from water.
However, after using flavored ice blocks, wash and dry thoroughly. Do not wash
in dishwasher.
COOL, EASY FROZEN TREATS
Make delicious, frosty Snow cones, drinks, slushes and desserts with your Back To
®
Basics Ice Shaver!
•
Add your favorite Back To Basics
beverage to a cup or glass of shaved ice. Garnish with fruit if desired.
•
Flavor ice blocks prior to freezing with your favorite syrup or beverage. Tastes
great using soda flavors or coffee.
•
Make ice blocks of your favorite fruit juice, then shave and garnish with fruit.
This makes a refreshing summer-time dessert.
U Y
SING OUR
®
premium flavored syrups, soda, juice or other
3
I S
CE HAVER
Handle
Container
Base
Ice Cups (2)
®