Manual Operation - Chauvet D-Fi Guía De Referencia Rápida

EN
What Is
Included
To Begin
Product
Description
Product Overview

Manual Operation

•
One D-Fi™ 2.4GHz
•
One Power Supply
Unpack your D-Fi™ 2.4GHz and make sure you have received all parts in
good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The D-Fi™ 2.4GHz is a wireless transmitter/receiver (transceiver) with a
range of up to 200m (656ft). Fully FCC approved, the transceiver
wirelessly pairs multiple D-Fi™ 2.4Ghz units with one button and supports
one DMX-512 universe.
Antenna
3-pin DMX In/Out
Power In
1. Press MODE to switch between Transmitter (t-AU) or Receiver (r-AU)
then press ENTER to save the setting.
2. While the "Transmitter" or "Receiver" is flashing, press the UP or
DOWN buttons to select your desired frequencies, from 1~16.
3. Press ENTER to store the selected frequency before the Transmitter
(t-AU) or Receiver (r-AU) stops flashing.
Note: The Transmitter (t-AU) or Receiver (r-AU) symbol will flash for
about 20-40 seconds.
Note: The Transmitter (t-AU) and Receiver (r-AU) must be within 10
feet of each other during setup. Once set up, they can be separated.
•
One Warranty Card
•
One Quick Reference Guide
Mounting Hole
3
D-Fi™ 2.4GHz QRG
Safety Hook
Top View
Bottom View
5-pin DMX In/Out