Uline H-3450 Manual De Instrucciones página 3

π
H-3450
LOCKOUT/TAGOUT
WALL MOUNT STATION –
ELECTRICAL
1. Select the properly sized plug cover: H-3435 for
110 volt plugs, H-3436 for 240 to 600 volt plugs.
(See Figure 1)
Figure 1
H-3435
2. Rotate and open the lockout cover, position the
plug inside and close the cover. (See Figure 2)
Figure 2
PAGE 3 OF 12
1-800-295-5510
uline.com
ELECTRICAL PLUG COVER LOCKOUT ASSEMBLY
H-3436
3. Secure with safety lockout padlock(s) by inserting
shackle(s) through the overlapping eyelets.
(See Figure 3)
Figure 3
4. To secure two plugs together so they cannot be
unplugged, cut out the circular center section of
the lockout cover. (See Figure 4)
Figure 4
0715 IH-3450