Neato Robotics 945-0292 Guia De Inicio Rapido página 2

1
Turn to Run Mode...
Remove dirt bin, and locate
the ON/OFF switch.
Push the switch DOWN
to turn your Neato to ON.
Replace the dirt bin.
...then plug in the charging base
Place the base 3 feet from any corner and make sure
there is space in front of the charging base for the
Neato Vacuum to dock. Plug the charging base into
the wall.
2
Select language and charge your Neato Vacuum
Place your Neato Vacuum up against the
charging base.
The LCD screen will light up and prompt you to
select a language for the display screen. Use
the up and down arrows to select the language,
then press SELECT.
Once the language is selected, the light around
the START button will light up to let you know
it is charging. When it is solid green in approxi-
mately 2 to 3 hours, it's ready to clean.
Quick Start Guide
Register your
Neato and get the
complete user manual at:
NeatoRobotics.com
Ensure that the base is sitting up against
a wall and is not tilted forward.