CONTENTS OF PACKING
The packing must contain:
•
Video signal distributor art. 4555/28
•
Pair of brackets for rack mounting
•
Wide Range Power Supply Unit 100-240V~ 47-63Hz / 12V=
•
Mains power cable
•
Instruction manual
On delivery of the product check if the packing is in order and, if it shows any signs of
dropping or scoring, contact the supplier immediately. Check the contents against the
above parts list.
PRODUCT DESCRIPTION
The art. 4555/28 is a video signal distributor for CCTV applications designed for mounting
on a 19'' rack.
It represents a simple and reliable solution for distributing a video signal from a camera
to several devices without losing in signal quality.
The unit has two composite video inputs and each input is associated to four video
outputs. The art. 4555/28 is extremely versatile since its three-way deviator, easily
accessible on the back panel, can provide the following configurations:
Deviator set to DUAL - the unit is configured as a dual distributor with 1 input and 4
outputs;
Deviator set to IN1 - the unit is configured as a distributor with 1 input (IN1) and 8
outputs;
Deviator set to IN2 - the unit is configured as a distributor with 1 input (IN2) and 8
outputs.
EN