Installation - Comelit Security 4555/28 Manual Del Usuario

INSTALLATION

If the distributor has to be mounted on a 19" rack, remove the four screws to the sides
of the front panel and fit the brackets fixing them by means of the same four screws
(figure 1).
The back of the art. 4555/28 distributor has 2 BNC connectors for video signal inputs, 8
BNC connectors for video signal outputs, a 3 way deviator and a power jack (figure 2).
The IN1 video input is linked to the following outputs:
• OUT1-1
• OUT2-1
• OUT3-1
• OUT4-1
The IN2 video input is linked to the following outputs:
• OUT1-2
• OUT2-2
• OUT3-2
• OUT4-2
EN
Figure 1
Front view
Rear view
Figure 2