Unpacking; General Operation Of The Inverto Idl2000S - InVento IDL-2000S Manual Del Usuario

Ensure adequate ventilation: Never cover the ventilation slots on the unit casing. When in operation,
the digital receiver should be placed on a straight and solid base. It should not be placed in direct sunshine
or too close to a heater or radiator. Ensure there is sufficient free space around the unit for air circulation.
Earthling the LNB and satellite antenna: If lightning strikes the antenna, this would be dangerous.
Therefore the LNB on the satellite antenna as well as the antenna itself must be connected to the
house/building earth system.
Protection from lightning: In case of thunderstorms, to prevent damage switch off the receiver, disconnect
from the main power supply, and disconnect the satellite antenna cable from the unit.
Use only original parts and accessories: Use only original parts, or parts recommended by a specialist
retailer. Non-observance of this warning cancels the unit guarantee. Only qualified specialist personnel
should carry out any repairs.
Disconnecting power during extended absence: If the appliance is to be unattended for an extended
period of time, e.g. when you go on holidays, you should disconnect it completely from the mains power
supply.
Retain original packaging material: Please retain the original packaging, should it be necessary at some
stage to return the unit.
The manufacturer undertakes no responsibility for damage or injury caused by non-observance
of these safety precautions, or by inappropriate handling of the appliance.

1.3 Unpacking

Unpack the INVERTO IDL2000S and verify that the following items are included in the packaging.
• 1 x Remote Control Unit (RCU)
• 1 x User's Guide
• 2 x AAA batteries
• 1 x Audio/Video Cable
• 1 x Inverto IDL2000S Digital Satellite Set Top Box

1.4 General Operation of the Inverto IDL2000S

Throughout this manual you will notice that the everyday operation of your Inverto IDL2000S is based on
a series of user friendly on screen display and menus. These menus will help you get the most from your
Inverto IDL2000S, guiding you through installation, channel organizing, viewing and many other functions.
All functions can be carried out using the buttons on the RCU, and some of the functions can also be
carried out using the buttons on the front panel.
Please be aware that new software updates may change the functionality of the Inverto IDL2000S
Should you experience any difficulties with the operation of your Inverto IDL2000S, please consult the
relevant section of this manual, including the Problem trouble-shooting, or alternatively, contact your
dealer.
5