Front Panel; Rear Panel - InVento IDL-2000S Manual Del Usuario

1.7 Front Panel

Figure 2: Front Panel
1. Programme down key
Decreases the programme counter
2. Programme up key
Increases the programme counter
3. On/Off switch
Switches the receiver on or off
4. On/Off LED
Indicates whether the receiver is on or off
5. Infra-red sensor (Remote Control)
Receives signals from the remote control unit
6. Display
Shows programme counter or time
Figure 3: Rear Panel
6
1. Power Jack
2. Connect to amplifier using SPDIF
3. Connect to a TV or audio tuner
4. Connect to the TV or VCR Using scart cable
5. Connect to a PC for software upgrade
6. LNB IN: Connect to satellite antenna
LNB OUT: Connect to another receiver
5 4 3 2 1
7