Video Output - Jensen JiTS-260 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VIDEO OUT FROM THE iPod/iPhone (Using the remote control)
You can connect this unit to a television or other video display that has a composite video input.
NOTE:
1.Make sure that the power is turned off when connecting or disconnecting the other devices.
Make sure that the other devices are connected to the correct terminals.
2.This unit is not magnetically shielded and may cause color distortion on the screen of some
TVs or video monitors. To avoid this, you may need to move the unit further away from the
TV or monitor if unnatural color shifts or image distortion occurs.

VIDEO OUTPUT

1. Securely dock your iPhone or iPod with video.
2. Connect one end of an RCA video cable (not included) to the VIDEO OUT jack on the back
of the unit.
3. Connect the other end of the cable to VIDEO IN of your television or video display.
4. Power on the TV set and the unit, press the FUNCTION button repeatedly or iPod button
directly on JiTS-260i remote control to select iPod mode. The Red indicator lights on the
FUNCTION button.
5. Select a movie from your iPod/iPhone menu to start play back. Video from a docked
iPhone/iPod can now be played through the unit to the connected television or video display.
Note: Video out will be automatic when using an iPod touch or iPhone. If you are using some
older iPod models, you may need to turn on iPod's TV OUT option on manually.
iPod: On the main menu choose video then select video setting.
iPod: Make sure the TV Out section is set to "ON".
iPod: Switch back to the movie library and play the movie of your choice.
9
AUX IN 1
AUX IN 1
AC 120V~ 60Hz

Publicidad

Tabla de contenido
loading

Tabla de contenido