Tabla de contenido
Publicidad
The charging indicator light will illuminate red.
2. When the indicator light goes out, the battery is fully
charged.
3. After charging, remove the micro USB cable.
Low battery warning: When you hear two beeps at
regular intervals, please recharge the speaker.
PARING WITH A BLUETOOTH-ENABLED DEVICE
1. Turn on the speaker.
The speaker will enter Bluetooth mode and the
status indicator light will flash blue quickly.
2. To pair, go to Bluetooth settings on your Bluetooth
enabled device and connect to "Berlin".
Enter "0000" if asked for a passcode.
Mode
Status
The indicator light will flash
Bluetooth pairing
blue quickly.
Paired
You will hear jingle sound and
the status indicator light will
flash blue slowly at regular
intervals.
NOTE: Once the Bluetooth device
is connected for the first time, the
speaker will remember the paired
setting and will automatically
reconnect to the same Bluetooth
device the next time they are in
range.
EN-5
LISTENING TO MUSIC
Once the speaker has been successfully paired to
your music device, you can listen to music by using
,
and
.
Adjust the volume as desired by repeatedly pressing
/
.
Select the desired track to play by pressing and
holding
/
for about 2 seconds.
To pause, press
. To resume play, press again
NOTE : When you want to playback from another
Bluetooth device, press and hold
to disconnect the speaker by from the Bluetooth device
already in use.
HANDS-FREE FUNCTION:
1. To receive an incoming call, press
2. To end a call, press
for about 2 seconds
.
again.
EN-6
.
Publicidad
Tabla de contenido
