Tabla de contenido
Publicidad
EN
REPAIR AND MAINTENANCE
LEVER OF REGULATION
The lever of regulation has three positions (ascending, medium and
descending)
ascending
media
descending
When the hand pallet is not, the helm must be placed in medium
position. The position of the lever of regulation has been adjusted
in factory, if it is necessary to change it, the customer must follow
the following steps:
1. If you push the lever downwards in medium position, the
forklifts will go upwards, then the user must turn around the
unload screw following the movement of the hands of the
clock, the forklifts will not rise when you press the lever.
2. If you push the lever downwards in medium position, the
forklifts will go downwards, and then the user must turn the
unloading screw following the movement of the hands of the
clock until the forklifts do not go downwards when you press
the lever.
3. If the user has the lever of regulation in a descending position,
the forklifts do not go downwards, then the user must turn the
unloading screw following the movement of the hands of the
clock until the forklifts go downwards when the user presses
the lever.
4. If the user has the lever of regulation in an ascending position,
the forklifts will not go upwards. The user must turn the unloa-
ding screw following a direction opposite to the movement of
hands of the clock until the forklifts go upwards with the lever
in this position.
HYDRAULIC OIL SUPPLY
Check the oil every six months. We recommend you to use the
hydraulic oil: ISO VG32, a 400C its kinematics viscosity is of 32
cSt, the total 0.3 liters.
Due to transport or reversal, it is possible that some air gets into the
hydraulic bomb, and this fact can cause a problem in the forklifts.
Perhaps they are not going to rise when they are in an ascending
position.
The following method can help the user to avoid the problem: The
user must move the lever from the ascending position to the ascen-
ding position more than once, repeating the process.
ROUTINES OF MAINTENANCE
AND REPARATION
The routine of maintenance is essential. The user must center this
revision in the wheels and the mandrel, retire all the strange bodies
and objects which are placed on the wheels, and also avoid that the
wheels get poked.
When the wheels are free of dirtiness and strange objects, the user
must retire the load and place the forklifts downwards until they
--
reach their lowest position.
--
--
LUBRICANT
When the lever of regulation is in factory, we apply different long
life lubricants both to the bearings and the axis, the user only
need to apply the lubricant once a month or every time that the
user proceeds to do an in-depth revision.
SECURITY GUIDE
1. Before proceeding to use the hand pallet, the user must read
the following guide of instructions carefully.
2. The user must bear in mind that before pulling of the hand pallet
, it is necessary to rise the forklifts a little.
3. When the user pulls of the hand pallet, it is important to keep
the lever in a medium position. In such way, it will be easier to
move the hand pallet and the bounces of the piston of the lever
will be reduced. Moreover, it will also protect the seal of the
liquid and the components of the piston. All this is important
because it helps the life and usefulness of the hand pallet.
4. The hand pallet must be used and handled by people who have
the appropriate qualification on how to use it.
5. Before proceeding to use the hand pallet, the user must revise
the wheels, the levers and the forklifts.
6. Don't use the hand pallet on oblique surfaces.
7. Don't put a person on the forklift.
8. It is recommended that the operator wears gloves and security
footwear.
9. In the process of elevation and transport of load, all the workers
which are near the hand pallet must keep themselves far from
the forklifts, at least at a distance of 600 mm.
10. The user must pay a lot of attention in the way of charging the
pallet and avoid the slope or deviation of the load. (see figure
2 B)
11. The user must not exceed the maximum capacity of the hand
pallet.
12. The user must use the hand pallet with care in special circum-
stances and placements.
7
Publicidad
Tabla de contenido
