Arcan LL-35 Guia De Inicio Rapido

MODEL LL-35
ULTRA LOW LIFT POINT SERVICE JACK
7000 LB. CAPACITY
THIS OPERATING MANUAL CONTAINS
IMPORTANT DETAILS CONCERNING THE
SAFE OPERATION OF THIS TOOL. THE USER
MUST READ AND UNDERSTAND THESE
DETAILS BEFORE ANY USE OF THE TOOL.
THIS MANUAL MUST BE RETAINED FOR
FUTURE REFERENCE.
OWNER/OPERATOR RESPONSIBILITY:
The owner and/or operator shall study the product instructions and
retain them for future reference.
The owner and/or operator shall have an understanding of the
product operating instructions and warnings before operating
the jack.
Warning information shall be emphasized and understood. If the
operator is not fluent in English, the product instructions and
warnings shall be read to and discussed with the operator in the
operator's native language by the purchaser/owner or his designee,
making sure that the operator comprehends its contents.
INSPECTION
Visual inspection should be made before each use of the jack. This
inspection should check for abnormal conditions such as cracked
welds, leaks, and damaged, loose or missing parts.
Any jack that appears to be damaged in any way, is found to
be worn or operated abnormally, must be removed from
service immediately.
Any jack that operates abnormally shall be removed from service
until repaired by a qualified repair service center.
If the jack is accidentally subjected to an abnormal load or shock, it
must be taken out of service immediately and be inspected by a
qualified repair or service center.
It is recommended that an annual inspection is performed on the
jack and that any damaged or worn parts, decals or warning labels
be replaced with manufacturer's specified parts.
ALTERATIONS
Because of potential hazards associated with this type of
equipment, no alterations shall be made to the product.
LL-35
LAS INSTRUCCIONES EN ESPAÑOL COMIENZAN EN LA PÁGINA #5.
FOR YOUR SAFETY AND TO PREVENT INJURY:
Use Service Jack for
THIS IS A LIFTING DEVICE ONLY. DO NOT MOVE OR DOLLY
THE VEHICLE WHILE ON THE JACK. IMMEDIATELY AFTER
LIFTING, SUPPORT THE VEHICLE WITH APPROPRIATE
MEANS.
DO NOT EXCEED RATED CAPACITY. OVERLOADING CAN
CAUSE DAMAGE TO OR FAILURE OF THE JACK.
LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE
VEHICLE MANUFACTURER.
CENTER LOAD ON SADDLE PRIOR TO LIFTING. OFF-CENTER
LOADS MAY CAUSE DAMAGE TO JACK, LOSS OF LOAD,
PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
THIS JACK IS DESIGNED FOR USE ONLY ON HARD LEVEL
SURFACES CAPABLE OF SUSTAINING THE LOAD. USE ON
OTHER THAN HARD LEVEL SURFACES CAN RESULT IN JACK
INSTABILITY AND POSSIBLE LOSS OF LOAD.
NO ALTERATIONS TO THE JACK SHALL BE MADE.
READ, STUDY AND UNDERSTAND THE OPERATING MANUAL
PACKED WITH THIS JACK BEFORE OPERATING.
FAILURE TO HEED THESE WARNINGS MAY RESULT IN LOSS
OF LOAD, DAMAGE TO JACK, AND/OR FAILURE RESULTING
IN PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
1
PROF E SS IONA L TOOLS
lifting purposes
ONLY.
Always support
vehicle with
jack stands.
rev. 12/04/02