SRAM ROCK SHOX Manual Del Usuario página 4

English
1
PREPARE THE FRAME
Use isopropyl alcohol and a clean, lint free rag to clean any debris or grease from the
inside of the seat tube. Remove any burrs from frame's seat tube edges then smooth
with 400 grit sandpaper.
2
PREPARE THE SEATPOST
Remove the saddle clamp bolt(s) and apply grease to the bolt threads. Loosely
re-install the saddle clamp bolts.
3 APPLY FRICTION PASTE
Apply a moderate amount of friction paste to the inside of the seat tube and contact
surface of the seatpost. Do not apply grease.
WARNING - Seatpost Slippage
Friction paste is designed to create friction between the contact surfaces to prevent
the seatpost from slipping without over-torquing the seat clamp device. Failure to use
friction paste could allow your seatpost to slip during use which could lead to serious
injury and/or death.
4
Reverb User Manual
95-4215-005-000 Rev B