Connection Diagram - LEGRAND 4 306 92 Manual Del Usuario

This Camera Housing is constructed by die-cast aluminum alloy with powder coated finished and equipped with adjustable Fully-Cable
Managed Mounting Bracket.
Power source IEEE 802.3at Plus Compliant 30W PoE is provided.
The Product is CE certified, owns IP65 environmental protection level and conform with RoHS regulations.

CONNECTION DIAGRAM :

CAT6
CAT5
cable
cable
HOUSING
Inner space for camera mount W90 x H70 x L240 mm
Dimensions
390mm
390mm
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician. Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and
approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
230 VAC
230 VAC
PoE injector
PoE injector
OUT IN
CAT6
cable
Fully-Cable Managed Bracket
Adjust position and
9
SWITCH SWITCH
Dimensions of bracket base
110mm
83mm
direction
8mm
Screw 1/4"
358mm
114mm
25mm
69mm
95mm
55mm
50mm