Electrical Safety; Technical Data - Lavor EDS-M 15000 Manual De Instrucciones

The following symbols are used throughout this
gB
manual:
@
Denotes risk of personal injury or
damage to the tool.
The following pictograms are shown on the
machine:
Maximum submerging depth.
IP 68: Suitable for use under water.

ELEcTRicAL SAfETy

@
Always check that the power
supply corresponds to the voltage
on the rating plate.
DEScRiPTiON (fig. A)
Your submergible pump has been designed to
pump clean and slightly polluted water. The
maximum water temperature is 35 °C. The
pump is not intended for continuous use.
1 Float switch
2 Outlet opening
3 Handle
Connecting the outlet pipe (fig. A)
Slide the outlet pipe on the outlet opening (2).
n
Positioning the pump (fig. A)
Hold the pump by the handle (3).
n
Lower the pump carefully in the water.
n
Check that the pump is standing firmly on the
n
bottom.
@
Before installing or moving the
pump always remove the mains
plug from the wall socket.
Switching on and off (fig. A)
To switch on the pump, insert the mains plug
n
in the wall socket.
To switch off the pump, remove the mains
n
plug from the wall socket.
The pump only operates when the float switch
(1) floats. This prevents the pump from running
dry during operation.
30
@
The pump has been fitted with a
thermal protection. In case of
overload the motor is switched off.
After the motor has cooled down
the pump automatically switches
on again.
MAiNTENANcE
The pump is maintenance free. Defects must only
be repaired by an authorised service station.
@
The pump must not be opened by
the user.

TEchNicAL DATA

Mains voltage
Mains frequency
Power input
Max. pump capacity
Max. lift
Max. submerging depth
Max. grain size
Max. water temperature
Weight
Level of sound pressure measured according to
ISO 3744:
L (sound pressure)
pA
gUARANTEE
This product has been thoroughly checked in
the factory. After purchase date a full 2 year's
guarantee applies to material and production
defects. A guarantee of 6 months applies to
rechargeable batteries/battery packs and chargers.
Guarantee conditions
If the product shows defects as a result of
material and production defects during the
period of guarantee, we guarantee free repair on
condition that:
­ the product has been used properly and for
the purpose for which it has been intended.
­ repairs are professionally carried out by
a person appointed by the supplier.
­ the proof of purchase will be submitted.
EDS-M 15000
V 230
Hz 50
W 1,100
l/h 15,000
m 9.5
m 8
mm 30
°C 35
kg 5.8
EDS-M 15000
dB(A) < 70