Sunrise System SRS 200 Manual De Usario página 4

'Down' button
(for dimming lamp manually)
Back through menu
Night Light
Security
Button
a while some users will be able to wake up with the sunrise only and they might wish to switch the alarm
sound to off. Press Menu to continue.
Setting the Sunrise Time
Press the Menu button repeatedly until the display shows SUNRISE, the current Sunrise time will be
displayed.The Sunrise time is the length of time it will take for the lamp to fade up from OFF to maximum
brightness.The maximum brightness of the lamp will coincide with the Alarm time.Therefore, if the Sunrise
time is set to 15 minutes and the Alarm time is set for 07:00 the lamp will start Fading Up at 06:45. The
lamp will get to full brightness after 15 minutes. When the alarm sound is set to Beep the sound will start
when the lamp is at maximum (07:00 in the example above).The Sunrise time can be set to
various times:- 15, 30, 45, 60, 75 or 90 minutes by pressing up or down buttons. Press Menu to continue.
Setting the Sunset Time
Press the Menu button repeatedly until the display shows SUNSET, the current Sunset time will be
displayed.The Sunset time is the length of time it will take to fade the lamp down from maximum
brightness to fully off. Sunset is initiated when the Alarm is activated and the lamp is on. If the lamp is
already off then the Sunset won't occur. The Sunset time can be set to various times:- 15, 30, 45, 60, 75 or
90 minutes by pressing up or down buttons.
Press Menu to continue.
Setting the LCD Backlight
'Up' button
(for increasing light manually)
Forward through menu
Alarm
Button
6
Press the MENU button repeatedly until the display shows BACKLIGHT, the current backlight setting will
also be displayed.You can now adjust the backlight by using the < or > buttons.
The options are:
OFF - the LCD Backlight and Snooze button will not illuminate.
DIM - the LCD Backlight and Snooze button will illuminate dimly.
BRIGHT - the LCD Backlight and Snooze button will illuminate at full brightness.
AUTOMATIC 1 - the LCD Backlight and Snooze button will illuminate at full brightness for 5 seconds at
any button press, after this time the LCD Backlight and Snooze button will go off.
AUTOMATIC 2 - the LCD Backlight and Snooze button will illuminate at full brightness for 5 seconds at
any button press, after this time the LCD Backlight and Snooze button will illuminate dimly.
Press Menu to continue.This means that you have selected the displayed option.
Setting the Calendar
When setting the CALENDER pressing the Alarm button will change the date display format.
There are 3 possible date display formats to choose from these are for example:
31 DECEMBER 06
31/12/2006
12/31/2006
Menu
Setting the Calendar year
Button
Press the MENU button repeatedly until the display shows CALENDER Year, the current setting is displayed
and you can now change the year by using the up or down buttons. Press Menu to continue.
Setting the Calendar month
Press the MENU button repeatedly until the display shows CALENDER Month, the current setting is
displayed and you can now change the month by using the up or down buttons. Press Menu to continue.
Setting the Calendar date
Press the MENU button repeatedly until the display shows CALENDER Date, the current setting is
displayed and you can now change the date by using the < or > buttons. Press Menu to continue.
Setting the LCD contrast
Press the MENU button repeatedly until the display shows CONTRAST, the current contrast setting will
also be displayed.You can now adjust the Contrast setting by using the up or down buttons.There are 16
steps to select from. Press Menu to continue.
Setting the Nightlight level
Press the MENU button repeatedly until the display shows NIGHTLIGHT LEVEL, the lamp will illuminate at
the current setting. You can now adjust the lowest level that the lamp will fade down to during a sunset by
using the up or down buttons.The light will stay at that user defined level during the night and will fade up
again before the alarm time.This feature enables the user to configure the Sunrise System to fade down
when the alarm is activated to a user defined bedside lamp level. For example, to be used as a child's night
light.The feature can be switched on or off by pressing the nightlight button (a lamp icon will also be visible
on the display to remind the user that night light mode is on). Press Menu to end programming.
Using the Nightlight
(DD MMM YY)
(DD/MM/YYYY)
(MM/DD/YYYY)
7