Testing Procedure; Testing The Power Supply - Maytronics Dolphin Service Kit Manual De Usuario

3. TESTING PRoCEDURE

3.1 Testing the Power Supply

3.1.1
Connect the tester to the power supply.
3.1.2
Switch the power supply on.
on
3.1.3
If the tester light is on ( ), proceed to test
the cable.
Dolphin Service Kit
| User Instructions
oFF
3.1.4
If the tester light is off ( ), check the power
socket and aC cable.
If they are working, then replace the power supply
and proceed to test the cable.
3