Publicidad
Idiomas disponibles
Idiomas disponibles
be installed either indoors or outdoors. An adjustable mounting bracket is provided to
allow positioning for desired sound coverage.
II.
SPECIFICATIONS.
Operating Voltage / Current:
Weight (approx.): 16 lbs. (7.3 kg)
Size:
Construction:
Sound Output [on axis at 10 feet (3m)]:
•
Wail:
•
Yelp:
•
Horn:
•
Temporal Slow Whoop
Hazardous Location Rating
Approval Agency Listings:
III.
INSTALLATION.
A.
Unpacking.
After unpacking the speaker, examine it carefully for possible damage that
may have occurred in transit. If equipment has been damaged, immediately file a claim
with the carrier stating the extent of the damage. Carefully check all shipping labels
and tags for special instructions before removing or destroying them.
B.
Mounting Arrangements.
The speaker can be mounted on any relatively flat surface capable of support-
ing the speaker's weight. Conduit connections can be made to the 1/2" NPT threaded
openings at bottom of the housing.
Property damage, serious injury, or death could occur if an accumulation of
water, snow, dust, etc. resides in the speaker projector, severely reducing or
preventing operation of this device. Mount the unit so speaker projector is
pointed horizontally or slightly downward.
1.
Remove the two 1/2"-13 hex head bolts, flat washers and lock washers
that secure the mounting bracket to the unit. Disconnect the lanyard from the mount-
ing bracket at the cotter ring.
16.3" (414mm) long, 17.0" (432mm) high, 13.1" (333mm) wide
Aluminum enclosure and adjustable steel mounting bracket with a
powder coat finish
Voltage
120VAC, 50/60 Hz 210mA
240VAC, 50/60 Hz 120mA
24VDC
108 dB(A)
108 dB(A)
102 dB(A)
102 dB(A)
Class I, Division 1, Groups B, C and D
Class I, Division 2, Groups A, B, C and D
Class II, Division 2, Groups F and G
Class III
Reference product nameplate
-2-
Current
600mA
Publicidad
