Malongo Jo Expresso Manual Del Usuario página 16

- Unplug the appliance and let it cool before cleaning.
Clean the waste box bin, water tank, drip tray, grille and brew
group with hot water and a mild detergent.
- Do not use the appliance for other than intended use.
Misuse of the appliance may result in personal injury.
- Surfaces are liable to get hot during use. The heating element
surface is subject to residual heat after use. Do not touch hot
surfaces. Use handles or knobs.
1 - preaMble
The idea of the semi-automatic machine is to stop the coffee cycle automatically.
The machine offers two different stregths of coffee that may be progammed by the client.
2 - prepare yourselF a coFFee
1 - Fill the tank with fresh water.
2 - Turn the machine on by pressing the switch (Position 1) behind the machine.
The central green LED will flash.
Wait until the green LED is steady.
3 - Insert the 123 Spresso Malongo pod
4 - Switch the selector to the coffee position to close the cover. Press the preferred key (large or small cup, as
shown by the icons). The selected key will flash slowly while the coffee infuses and the other light will stay lit
and steady.
5 - The coffee cycle will stop automatically at the end of the cycle or manually if you press the key selected .
6 - Bring the selector back to position 0 to open the cover and eject the pod. The green LED will be steady
again.
7 - If the green indicator starts flashing rapidly:
8 - If the machine has not been used for 25 minutes, it will automatically change to the standby mode with
green LED off. To re-activate the machine to ON, simply press the small or large cup key, or rotate the
selector, or toggle the ON/OFF switch to position 1 again.
you cannot start preparing another
16
coffee.