Parts Checklist - Aquavitro element M Manual De Instrucciones

Introduction
The element™ M Reactor is a filter media reactor that allows for the use of virtually any type of filter
media in either fluidized or non-fluidized flow - including fine particle media such as resins. The
element™ M Reactor allows for excellent efficient reaction with consistent even flow from the bottom
of the reactor to the top. Using the adjustable internal plate, filter media can even be separated to allow
for various uses within the same reactor. The element™ M Reactor features a by-pass valve which
allows for fine flow regulation for even the most delicate media such as beaded resins.

Parts Checklist

Figure 1
A. Support Base
B1. Locking Ring
B2. Locking Ring
C1. Lower Reactor Chamber Cover
C2. Upper Reactor Chamber Cover
D1. element™ Sponge
D2. element™ Sponge
D3. element™ Sponge (not shown)
E. Reactor Column
F. Reactor Chamber
G. Separation Plate
H. Reactor Column Cover
I. Threaded Rod
I.1. Threaded Rod Knob
J. Drain Spillway
K. Pump
L. Filter Sock
M. By-pass Valve
N. Check Valve Ball
9