Start-Up; Operation - Beurer MG 315 Manual De Instrucciones

Colchoneta de asiento shiatsu
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Hand switch
2
4
6
9
12
13

6. Start-up

• Position the seat cover upright on a suitable seat with a sitting area and backrest (chair, sofa or similar).
Make sure that the seat has a sufficiently high backrest.
• You can achieve the most comfortable massage position on a chair with an upright back.
• Use the flexible fastening straps and hook-and-loop fasteners to secure the Shiatsu seat cover.
• Connect the device to the mains by plugging the plug into the socket.

7. Operation

Press your back against the massager in an upright posture. The upright posture is necessary to enable ac-
curate scanning of your back. The body scanning function is used for this and determines the size of the user.
The massage must be pleasant and relaxing at all times. Stop the massage or change your position or the
contact pressure if you find it is painful or unpleasant.
• Do not force or jam any part of your body, in particular your fingers, between the moving massage elements
or their holders in the device.
• Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage heads
can move to the left and right of your spinal column.
• Switch on the massager with the
being scanned. After scanning, the relax massage program is activated.
The LEDs signal the massage functions which are currently selected.
• The automatic switch-off function is activated with selection of the massage region and is preset to 15 min-
utes. You can set the automatic switch-off function to 5, 10 or 15 minutes by pressing the timer button.
Please note that changing the timer setting makes the timer start to count again from the beginning. To
avoid overheating the device, select the maximum massage duration at the beginning of the massage and
do not change it again during the massage.
3
5
7
8
10
11
14
15
1
button. The body scanning LED display flashes while your back is
15
1 Button
2 timer button (5 – 10 – 15 minutes)
3 demo button
4 Automatic massage programs
5 LED display for body scanning
6 Full button (massage for the whole back and
neck area)
7 back button (massage for the whole back
area)
8 neck button (massage for the neck area)
9 shiatsu button (Shiatsu massage)
10 swing button (swing massage)
11 spot button (spot massage)
12 height adjustment button (spot massage)
13 rolling button (rolling massage)
14 width button (distance between massage
rollers)
15 heat button (in-seat heating)

Publicidad

Tabla de contenido
loading

Tabla de contenido