Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7 - Installing Garment Bars
1.
Locate the bar dimensions in you configuration guide
2.
The double hang garment bars are created by cutting 2 bars to 45 in. wide.
3.
The long hang garment bar is created by cutting a bar to 23.5 in. wide.
4.
Double check bar measurements.
5.
Measure required dimension, mark & cut bar.
6.
Repeat for all bars.
9
7.
Insert bar end into end of garment bar.
8.
Turn clockwise to tighten & repeat for each bar end.
9.
Place garment bar onto J-hooks.
10. Secure garment bar to J-Hooks using #6 1 1/4 in. self tapping screws.
11. Repeat for all garment bar locations.
STEP 8 - Installing Adjustable Shelves
1.
Select a 24 in. adjustable shelf
2.
Insert shelf pin into shelf at hole location.
3.
Repeat at each hole location.
Publicidad
Tabla de contenido
