Radio Function; Manual Search; Bluetooth Operation - Trevi XF 500 Manual De Instrucciones

ENGLISH
ADJUSTING THE VOLUME
1. Turn the volume VOL(1) unit to increase or decrease the overall volume of playback or press (24) and (26) on the remote control to decrease or
increase the volume.
2. Turn the MIC VOL(2) to adjust the volume of the signal at the MIC.
Note: If the remote control button (24) moves the volume level to 0, the audio power output will be lower.
SETTING TONE TREBLE AND BASS
Turn the knob TREEBLE (5) to adjust the treble.
Turn the knob BASS (6) to adjust the bass.
ECHO EFFECT
Turn the knob ECHO (7) to increase or decrease the echo effect on the inputs MIC.
Note: The echo only works on microphone inputs.

RADIO FUNCTION

AUTOMATIC SEARCH
1. Turn on the unit and repeatedly press the MODE button(13) on the unit, or the MODE button(28) on the remote control and select the function
RADIO (will appear on the display idicazione frequency).
2. Press and hold the PLAY/PAUSE button(23) on the remote control to activate the automatic storing AUTOSCAN broadcasters (radio starts au-
tomatically search for radio stations stereo and automatically saves in memory). Saves up to 50 radio stations. During the search, press PLAY/
PAUSE (23) on the remote control to stop recording.
3. Use the NEXT(25) and LAST(27) on the remote control for listening to various radio stations saved in memory.
4. Using the numeric keypad(22) on the remote control, you can enter the number of the memory to quickly recall the radio station.

MANUAL SEARCH

1. Long press the NEXT(25) and LAST(27) on the remote control to perform a manual scan of radio frequencies; the search will stop 'when will'
received a stereo radio station.
2. Using the numeric keypad(22) on the remote control you can directly enter the frequency of the favorite radio.
Notes:
- The FM reception depends on the place where you place the unit.
- The proximity of TV sets, fluorescent lamps, or other appliances may cause interference in the reception of radio programs, in this case,
move this unit.
INPUT USB, SD/MMC
1. Insert a USB memory into the USB port(3) or an SD/MMC in the slot(4). Playback will start automatically, if not press the MODE button(13) on
the unit, or the MODE button(28) on the remote repeatedly until the display(14) show the "USB" or "CARD ".
2. To pause playback, press the PLAY/PAUSE(23) on the remote control, the display will show "PAUS".
3. To resume playback, press the PLAY/PAUSE button(23) on the remote control.
4. Press the NEXT button(25) on the remote control during playback to go to the next track, while the LAST button(27) to the previous tracks.
5. Press and hold the NEXT button(25) or LAST(27) on the remote control while listening to quickly search a particular musical passage. Release
the button to resume normal playback.
Using the numeric keypad(22) on the remote control, you can enter the number of the song to be played.
Notes:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory SD/MMC in FAT32.
- The unit will start playback of the file based on the number/letter, if files are: 01,02, it will start playing from the file 01.
- It is recommended to copy the memories only music files to play back and delete files and folders that are not relevant, the system will read more
quickly and there will be no errors when reading.

BLUETOOTH OPERATION

1. Turn on the unit and repeatedly press the MODE button(13) on the unit, or the MODE button(28) on the remote control and select the Bluetooth
function, the display(14) will show "BLUE".
2. The device adopts the function of automatic return to the paired devices, activation of the Bluetooth device tries before the paired Bluetooth devices
earlier, if they are not found within the first 5 seconds, it will automatically mode coupling with other external devices.
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices on the external device. After select the "XF 500".
5. Enter the password "0000" if required.
6. Press the PLAY/PAUSE(23) on the remote control to start playback and NEXT buttons(25) or LAST(27) on the remote control to select tracks.
8
XF 500