Akasa elite Manual De Usuario página 10

4. Boot-up your system. Windows or MAC operating system will search for and install the driver
automatically.
NOTE: in some cases switching off the system may not be required (depends on
motherboard Hot-Swap support for eSATA port).
(Windows)
To see your Elite hard drive enclosure open "My Computer" (Windows 2000/XP) or
"Computer" (Windows Vista/7). Double click on the icon of the external hard drive ready to use.
(MAC)
The icon of the ready to use external drive will appear on the desktop.
5. To access and browse the external drive under Windows or Mac simply double-click on its icon.
NOTE:
If the hard drive inside the enclosure is brand new it needs to be formatted before it
becomes accessible (for instructions see hard disk formatting chapter).
Disconnecting the Elite enclosure (eSATA mode)
WARNING!
Do not switch off the enclosure or unplug the SATA or power cable when using the Elite enclosure .
DOING THIS MAY RESULT IN LOSS OF DATA!
1. Turn off the system
2. Switch off and unplug the enclosure
9
eSATA Connection