Akasa elite Manual De Usuario página 8

4. To access and browse the external drive under Windows or Mac simply double-click on its icon.
NOTE: If the hard drive inside the enclosure is brand new it needs to be formatted before it becomes
accessible (for instructions see hard disk formatting chapter).
Disconnecting the Elite enclosure (USB mode)
WARNING!
Close all windows and quit all running applications that are stored on the Integral External Drive before
switching off the enclosure or unplugging the USB or power cables.
NOT DOING SO MAY RESULT IN LOSS OF DATA!
Windows 2000/XP/VISTA/7
1. Double-click on the
Hardware]
icon in the system tray. Dialog
box appears as on the right.
2. Highlight the [USB Mass Storage Device]
dialog box, click on [Stop], choose the USB2.0
External Drive that you want to disconnect, then
click on [Stop]
3. Wait for few seconds, the system prompts
"You may safely remove this
4. You can now safely switch off the enclosure or
unplug the USB cable from the USB port of the
computer.
Mac OS
1. Drag Elite External Drive's icon into
2. MAC OS will dismount the external drive from the
Desktop
3. You can now safely switch off the enclosure or
unplug the USB cable from the USB port
of the MAC.
7
[Unplug arrow icon or Eject
again on next screen.
device".
"Trash"
in the
USB Connection