Assembly - Attaching The Fan Blades And Brackets; Attaching The Blades To The Blade Brackets - HAMPTON BAY MAXWELL 91170 Guía De Uso Y Mantenimiento

Assembly - Attaching the Fan Blades and Brackets

6
Attaching the blades to the blade
brackets
□
Attach a blade (E) to a blade bracket (F) by inserting blade
attachment screws (AA) through the holes in the blade (E)
and into the blade bracket (F).
□
Tighten each screw (AA) securely.
□
Repeat these instructions for each blade (E) and blade
bracket (F).
E
F
Assembly - Attaching the Light Kit Fitter Assembly
8
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove one screw (I) from the black bracket below the fan-
motor assembly (B). Loosen, but do not remove the other two
screws.
□
Connect the blue wire exiting the bottom of the fan-motor
assembly (B) with the black wire from the top of the light kit
fitter assembly (C).
□
Connect the white wire exiting the bottom of the fan-motor
assembly (B) with the white wire from the top of the light kit
fitter assembly (C).
□
Attach the light kit fitter assembly (C) to the fan-motor
assembly (B) by pushing the light kit fitter assembly (C) up
over the two previously loosened screws (I) and turning to
secure. Re-install the screw removed in the first step. Tighten
each screw firmly.
7
AA
8
Fastening the blade assemblies to
the motor
□
Attach the blade assembly to the fan-motor assembly (B) by
inserting the blade assembly into the slot in the side of the
fan-motor assembly (B).
□
Insert a blade bracket screw with lockwasher (CC) into the
blade bracket (F). Repeat for the one remaining screw.
□
Tighten each blade bracket screw with lockwasher (CC)
securely.
□
Repeat these steps for the remaining blades (E).
B
F
CC
B
C
I