Operation - HAMPTON BAY MAXWELL 91170 Guía De Uso Y Mantenimiento

Assembly - Installing the Light Bulbs and Glass Bowl
9
Installing the light bulbs and glass
bowl
WARNING: Do not overtighten when installing the glass
bowl into the light kit assembly. Allow the glass bowl to cool
completely before removing.
□
With the power off, install the light bulbs (G) (Max. 9.5W,
provided) into the light bulb sockets.
□
Place the glass bowl (D) into the light kit fitter assembly (C),
aligning the three flat areas on the top flange of the glass
bowl (D) with the three raised dimples in the light kit fitter
assembly (C). Turn the glass bowl (D) clockwise until it stops.

Operation

REMOTE CONTROL OPERATING INSTRUCTIONS
Your fan is equipped with a remote control to operate the speed
and lights of your new ceiling fan, and controls the fan as follows:
Light/Dimmer button = Light on/off and Dimmer
Low button = Low speed
Medium button = Medium speed
High button = High speed
Fan off button = Power off
Reverse button = Fan reversing function
The appropriate speed settings for warm or cool weather depend
on factors such as the room size, ceiling height, and number of
fans.
NOTE: Do not wait for the fan to stop before pressing the reverse
button. The fan will not reverse direction if the fan is not moving.
Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer
setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
9
Please contact 1-855-HD-HAMPTON for further assistance.
G C
D
HAMPTONBAY.COM