Assembly; Operations; Getting Ready - Bissell SpotClean 5207 Serie Manual Del Usuario

Assembly

Assembling your portable machine is a
simple process.
1. Slide the flex hose clip into the opening on
the front of the machine. You will hear a "snap"
when it is locked into place.
2. Snap the hose grip bracket into the back of the
machine on the clean tank side. Wrap the flex hose
around the unit and snap hose grip into bracket.
3. Attach the cord wrap by snapping it into
place on the collection tank side of the machine.
Wrap the power cord around the cord wrap.
Snap the second tool storage (select models)
into the back of the machine between the cord
wrap and hose grip bracket.

Operations

Getting ready

1. To fill the clean water/solution tank
a. Remove the tank by lifting it straight up
and away from the unit.
b. Pull on the black tab to reveal tank opening.
The plug rotates out of the way for easy filling.
c. FOR LARGE MESS: Follow the fill lines on
your clean tank to add the correct amount of
hot tap water (140°F/60°C MAX), portable
machine formula, and 1oz of BISSELL Boost.
FOR SMALL MESS: Follow the fill lines on
your clean tank to add the correct amount
of hot tap water (140°F/60°C MAX), and
portable machine formula. DO NOT BOIL
OR MICROWAVE WATER.
d. Replace the plug by rotating into place
and pressing gently onto tank.
e. Replace the tank by lining up tank bottom
with indentations on machine. Press down
firmly on tank to secure in position.
2. Release the flex hose from the hose grip bracket.
Unwrap flex hose completely from around the unit.
3. Select desired tool for spot cleaning. Insert
tool on end of hose until it clicks into place.
4. Twist the Quick Release™ cord wrap clockwise
to unwrap the power cord completely.
WARNING
Do not plug in your vacuum cleaner until
you are familiar with all instructions and
operating procedures.
1.
1a.
1e.
3.
4.
2.
1b.
www.BISSELL.com
5