Setting The Time; Setting The Alarm; Snooze - Aromasound KUMO Instrucciones De Funcionamiento

Aromasound App Connection
Once you have installed the Aromasound app, launch the app, power on your Kumo and then press
the + button on the home page to connect to your Kumo product. The Kumo name and image will then
appear on the connection page. Select the name and the app will then connect and allow you to control
lighting, mist, alarms and music remotely.
If you experience any problems in connection, always check to install the latest version of the app. If
you have any further problems please contact us at
phone model and operating system version you are using. i.e. Samsung Galaxy S8 – Android version
8.0

Setting the time

• In standby mode, press and hold the
time format 24-hour (default) display.
• Press the + or - button to select 24-hour or 12-hour clock display format.
• Press the button to confirm and the 'hour' digits on the display will flash
• Press the + or - button to adjust the hour (press and hold the buttons for rapid setting)
• Press the button to confirm and the 'minutes' digits on the display will flash
• Press the + or - button to adjust the minutes (press and hold the buttons for rapid setting)
• Press the button a final time to complete the time setting.
Note: DO NOT press and hold this button for more than 5 seconds as this will trigger the set-up
procedure again.
You can also automatically set the time by connecting the Kumo to the Aromasound app.

Setting the alarm

You can set two alarms to ring at different time.
• In standby mode, press and hold the
digits and alarm icon (
• Press the - or + Button to adjust the hour.
• Press the or button to confirm and the minutes digits on the display will flash.
• Press the - or + Button to adjust the minute.
• Press the or
flash.
Note: You can also set the alarm ringtone, alarm diffuser, and alarm light effect when the alarm icon
( or ) on the display is flashing,
• Alarm ringtone setting: Press the
icons will appear on the display.
• Alarm diffuser setting: Press the
Red icon Every 30 secs for 30 minutes
Blue icon Every 2 minutes for 2 hours
Green icon Every 5 minutes for 2 hours
• Alarm light effect setting: Press the
100% 75% 50% 25% OFF
• And press the or
Note: Press the or
Alarms can also be set using the Aromasound app.

Snooze

• Simply tap the Snooze button to temporarily stop the alarm ringtone, but the ringtone will sound
again after 10 minutes.
• Press the or button to fully stop the alarm ringtone.
or ) on the display will flash.
button to confirm the time settingand the alarm icon (
button to confirm and the icon (
button to stop the alarm when the alarm function activates.
assistance@aromasound.eu
button to confirm entering clock-setting mode, and the
or button to confirm entering clock-setting mode; the clock
button to select the ringtone
button to select 3 diffuser modes.
button repeatedly to select the brightness of the LED light.
or
- EN 6 -
and please state the
or )on the display will
) will appear on the display.
,and these