Insignia NS-HWD1761 Guia Del Usuario página 16

Step 11 Attaching the hinges to the door
:
1 Lay the door (9) down flat on a padded surface with the hinge mounting holes facing up, then fit one hinge (H)
into each mounting hole.
2 Using a Phillips screwdriver, secure the hinges (H) to the door using two 1/2-inch flat head screws (G) for each
hinge. Use the pre-drilled holes so that the hinges are mounted level.
You'll need:
16
G (4)
H (2)
www.insigniaproducts.com
Phillips screwdriver
NS-HWD1761