Insignia NS-HWD1761 Guia Del Usuario página 17

Espresso Wood Finish TV Stand for TVs up to 65"
Step 12 Attaching the door to the TV stand
:
1 Using a Phillips screwdriver, loosen the two pre-mounted hinge brackets (the center screw) on the left side of
the TV stand, then slide the door/hinge assembly into the brackets (as shown in the detail below).
2 Tighten both hinges, then adjust so that the door fits squarely in the opening (as shown below).
You'll need:
Phillips screwdriver
www.insigniaproducts.com
17