8
25. Pick up the Upper Back Panel (R) and align the pre-drilled holes against the upper long edge with the
pilot holes on the back stretcher of the Top Panel (A). Attach the Back Panel (R) in place using the
provided Washer Head Screws (8).
26. Align and attach two Lower Back Panels (S) to the mantel base with the provided Washer Head Screws
(8).
Assembly Instructions
8
R/S
S
M3.5 x 15 mm Washer Head
(38 used in this step)
R
21
Screw
⑧
S