Whalen WMFP60FH-14 Manual De Instrucciones página 8

4. Insert two Wood Dowels (3) into the inner holes of the Middle Crossbar Assembly (L). Tap it in with a
rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
5. Align the drilled holes on the Center Shelf (B) with the inserted Wood Dowel (3) on the Middle
Crossbar Assembly (L), and then press them together. Attach the Middle Crossbar Assembly (L) in
place by engaging three Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
Assembly Instructions
L
1
3
Cam Lock
(3 used in this step)
①
1
1
3
B
Wood Dowel
(2 used in this step)
8
③