Distribution Of Source Code Licensed Under The Open Source Software License - Mitel MTL-300AN Información De Seguridad Y Cumplimiento Normativo

Notes on Security
Because a wireless LAN uses electromagnetic signals instead of a network
cable to establish communication with network devices, it has the advantage of
allowing devices to connect to the network easily. However, a disadvantage of
this is that within a certain range, the electromagnetic signals can pass through
barriers such as walls, and if security countermeasures are not implemented in
some way, problems such as the following may occur:
• Communication is intercepted by a third party
• Unauthorized access to the network
• Leakage of personal information (ID and card information)
• Spoofing and the falsification of intercepted data
• System crashes and data corruption
Nowadays, wireless LAN cards or access points are equipped with security
measures that address such security problems, so that you can enable
security-related settings for wireless LAN products in order to reduce the
likelihood of problems occurring.
We recommend that you make yourself fully acquainted with the possible
implications of what might happen if you use a wireless product without
enabling security features, and that you configure security-related settings and
use wireless products at your own responsibility.
Description
Congratulations on your purchase of the Mitel Wireless LAN Adapter! The Mitel
Wireless LAN Adapter is a wireless bridge that can add a wireless connection
feature to non-wireless devices with a 10/100/1000BASE-T wired LAN interface.
It allows any Ethernet enabled device (such as Mitel's product line of IP phones)
to join a secure, high-speed network. It is software transparent meaning no
changes to drivers, management tools, or applications are needed.
It allows flexibility to locate Ethernet devices in places where running cables is
difficult or impossible. It supports industry leading security including WPA,
WPA2, and WEP, plus 802.1x authentication with the most commonly used EAP
types.
Features
• Easily add robust, secure wireless capabilities to Ethernet devices
The Mitel Wireless LAN Adapter is a high-performance wireless network
adapter which enables any Ethernet device to become an 802.11a/b/g/n
dual band wireless network device, giving you freedom to place it
anywhere in your facility.
• Dual band IEEE 802.11a/b/g/n support
The Mitel Wireless LAN Adapter is designed to communicate in the 2.4
GHz and 5 GHz bands. Radio interference in the commonly used 2.4 GHz
band can be avoided by utilizing 5 GHz. The maximum radio-frequency
transmit power is 150 mW at 5 GHz.
• Gigabit Ethernet support
The wired LAN port supports 10/100/1000BASE-T (auto-recognition).
• Multi-client operation mode
• Able to connect up to 16 wired LAN devices through a Ethernet Switch
to the wireless LAN.
• Uses the MAC address of the Mitel Wireless LAN Adapter for wireless
LAN communications.
• Simple to setup and use
The Mitel Wireless LAN Adapter is easy to set up using the enclosed
network setup cable. No special drivers or software are required.
2
• Enterprise security
The Mitel Wireless LAN Adapter supports the following security functions:
• WEP (64 Bit/128 Bit)
• WPA-PSK (TKIP/AES)
• WPA2-PSK (AES)
• IEEE 802.1X EAP-PEAP, EAP-TLS, EAP-TTLS, EAP-FAST, EAP-LEAP
Distribution of Source Code Licensed Under the Open Source
Software License
This product includes open source software.
We will provide you with the corresponding GPL (GNU General Public License)
source code for our software via a medium such as CD-ROM at your expense
for a minimum of three years after you purchase if the product includes the GPL
software licensed under the GPL.
We will also provide you with the corresponding LGPL (GNU Lesser General
Public License) source code if the product includes the LGPL software licensed
under the GPL. To request the source code, please contact Mitel Networks™
Corporation.
Notice to Canadian Customers
This Class B digital apparatus complies with Canadian ICES-003.
RSS 247 IC: 4908A-SKPCEANZ
Notice to U.S. Customers
FCC ID: N6C-SXPCEANZ
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by Mitel Networks
Corporation may void the user's right to operate the equipment.
Notice to Customers in Australia
• Do not use in areas where there are explosive hazards.
Notice to European Customers
This equipment is in compliance with the essential requirements and other
relevant provisions of R&TTE Directive 1999/5/EU. The Declaration of
Conformity may be consulted at www.mitel.com/declarations.
This equipment is intended to be used in the whole EU and EFTA.
For additional regulatory information, refer to product specification at
www.mitel.com.