Bluetooth ® Mode; Modo Bluetooth; Bluetooth ® Configuration; Connection Procedure - Bowers XT3 Instrucciones De Funcionamiento

®
BLUETOOTH MODE
MODALITÀ BLUETOOTH
®
BLUETOOTH CONFIGURATION

CONNECTION PROCEDURE

1. Symbol off..............disconnected mode
2. Symbol blinking.....advertising mode
3. Symbol on...............connected mode
Connection:
1. Activate Bluetooth
2. Start the instrument. By default the Bluetooth
connection during 120s (advertising mode).
3. As soon as the device is detected, a connection is established automatically. If no connection is
established during 120s, reactivate the Bluetooth
4. Instrument is ready to communicate (connected mode).
Pairing:
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), it is necessary to clear all pairing information
on the instrument using the
14
MODE "BLUETOOTH
®

MODO BLUETOOTH

®
Smart compatible software and hardware (Master : PC, Display Unit).
/ menu.
®
"
®
®
module is active and the instrument is available for
®
module using the
®
BLUETOOTH
- Clear pairing information
- Display the MAC address
/ menu.
MODUS