Testboy 130 Instrucciones De Empleo página 17

Operation
Thank you for choosing a Testboy
Using the Testboy
changing magnetic fields. The Testboy
suited for testing items such as solenoids or relays.
Non-contact magnetic field detection
The item being tested does not need to be
dismantled or removed prior to testing. As
a first step, the batteries should be functi-
on tested as described below. Put the tip
of the magnetic field tester next to the ob-
ject to be tested (Fig. 1a). If the tip lights
up, the object is magnetically activated. It
is not required to stop machines and devi-
ces in order to test components.
Functional check
Take the test magnet from the Testboy
close to the tip (1a) of the device, which should light up. If it
does not light up, the batteries should be changed.
®
Testboy 130
®
130 is it possible to detect both static and
®
130.
®
130 is therefore ideally
®
130's clip and hold it
Operation
17