EN
Use as Chopper
The chopper is suitable mainly for processing hard and dry foodstuffs such as nuts, chocolate,
hard cheese etc.
The associated illustrations D can be found on the back fold-out page.
1. Plug the blade attachment (9) onto the pin in the container (10)
2. Place food for chopping into the container. Do not exceed the MAX marking in the con-
tainer!
3. Place the
cover (8)
4. Place the motor
unit (1)
5. Completely unwind the mains cable and connect the mains plug to a plug socket that is
easily accessible.
6. Press the On / Off switch (2) to switch it on. The more it is pressed, the higher the rotating
speed of the blades.
7. Let go of the On / Off switch from time to time so that the device stops and the food
residues drop down to the bottom of the container.
8. Remove the mains plug from the plug socket after use.
9. Press the release button (4) and take the motor unit off the cover.
10. Rinse off the blade attachment, the container and the cover as soon as possible after use so
that no food residues dry on (see the
Measuring Cup
NOTICE
The measuring cup is not suitable for transportation. Its lid is not leakproof.
•
The food can be processed and stored in the measuring cup (13). Place the
measuring cup for storage.
on the container.
on the cover. It must engage.
"Cleaning" chapter).
of the chopper.
lid (12)
on the
22