Publicidad
Idiomas disponibles
Idiomas disponibles
Position the microphone about 12ins/30cm from the sound source. The recorder
features an Automatic Level Control (ALC) to maintain all recordings at an optimum
level. The volume control operated only during replay and therefore does not need
adjustment.
Because the microphone built into your machine is in close proximity to mechanical
moving parts, it may pick up noise from these if the recorder is operated at greater
distance that 12ins/30cm from the sound source.
Recording Using an Line-in jack
Connect a low-impedance microphone to the Line-in jack.
For maximum signal to noise performance position, place the external Line-in jack
as close to the audio source as possible. Insertion of a jack plug into the Line-in jack
microphone socket automatically disconnects the built-in microphone.
Publicidad
