Vetus COMBIFLEX Serie Instrucciones De Instalación página 7

ENGLISH
1 Mounting
In connection with the axial
movement of the propeller shaft
a minimum free space between
outer bearing and propeller hub
is required.
2 Propeller-thrust
N.B. When sailing in forward direc-
tion the rubber part must be com-
pressed.
Using the Combiflex in combina-
tion with a V-drive type gearbox is
not allowed!
3 Over-size (larger) propeller shaft diameter
Reduce the propeller shaft diam-
eter for the taper length (dimen-
A ... h9 DIA
sion 'A') to the given dimension
'd' of the coupling, see Overall di-
mensions. Radius 'r' minimal 2 mm
(1/16").
R = 2 ( 1 / ")
16
7
vetus® Propeller shaft coupling 'Combiflex'
030210.01