Página 1
ALF 218 INSTRUCTION MANUAL WE’RE HERE TO HELP Want to watch Want to watch Get it right the Get it right the Our US-based Our US-based Recommended placement Recommended placement a video that a video that first time. first time. install experts install experts shows how...
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS Before getting started, let’s make sure this mount is perfect for you! Para Español ver página 20 Does your TV No — Perfect! (including accessories) 100 lb weigh more than Yes —...
Página 4
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Página 5
STEP 2 Parts and Hardware STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED] Contact Customer Service at 1-800-359-5520 to have these additional pieces shipped directly to you. Lag Bolt W E L C O M E ! T H A Wall Plate Template T H IS N K S...
STEP 3 Parts and Hardware Tools Included 4mm Hex Key (1x) Arm Assembly (1x) Securement Screw TV Interface Screw M5 x 30mm M5 x 8mm (2x) (1x)
Página 7
STEP 1 Attach TV Brackets to TV 1.1 Select TV Screw Diameter 1.2 Select TV Screw Length Standard configurations are shown. For special applications, or if you Test the TV screw diameters (M6, and For flat-back TVs, Spacers supplied for: are uncertain about your M8) in the threaded inserts on the back hardware selection, contact...
Página 8
1.3 Attach Vertical TV Brackets Position vertical TV brackets over your TV hole pattern - making sure the brackets are vertically centered and level. Install using the screw/washer/spacer combination you selected for your TV. : Flat-back TVs : Round-back TVs / Extra Space...
Página 9
1.4 Attach Horizontal TV Brackets Insert the horizontal TV brackets into the vertical TV brackets Center horizontal TV brackets and secure using the four screws as shown.
STEP 2A Attach Wall Plate Wood Stud Installation CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm) ●...
Página 11
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template IMPORTANT: Pilot holes must be drilled to a depth of 3½ in. (8.9 cm). Be sure to drill into the center of the stud. Install wall plate using lag bolts .
Página 12
STEP 2B Attach Wall Plate Solid Concrete or Concrete Block Installation CAUTION: Avoid potential personal injury or property damage! ● Mount wall plate directly onto concrete surface (no wall covering) Concrete Installation Kit CMK1 is not included ● Minimum solid concrete thickness: 8 in. (203 mm) Contact Customer Service at 1-800-359-5520 ●...
Página 13
and insert four anchors C3 (Fischer UX10 x 60R - included in the Concrete Installation Kit CMK1*). Remove the wall plate template CAUTION: Be sure the anchors C3 are seated flush with the concrete surface. Install wall plate assembly using four lag bolts C1 and four washers C2 (use ONLY the lag bolts and washers from the Concrete Installation Kit CMK1*).
Página 14
STEP 3 Hang TV to Wall Plate 3.1 Attach Arm Assembly to Wall Plate Hang arm assembly onto wall plate CAUTION: Avoid potential injury or property damage! For concrete applications, the base of arm must remain centered in wall plate NOTE: For wood stud wall applications, the arm can be adjusted within the wall plate for optimal positioning.
Página 15
3.2 Attach TV to Arm Assembly HEAVY! You may need assistance with this step. Hang the TV (top horizontal TV bracket ) onto arm assembly , then rest the TV into place. Lock the TV to arm assembly with TV interface screw using hex key CAUTION: Avoid potential personal injuries and property damage! Screw...
Página 16
Manage Cables Fully extend arm assembly to ensure you have enough slack in the cables to prevent binding. Remove the cable covers Route your cables along arm assembly Replace cable covers to secure the cables onto arm assembly...
Página 17
TV Adjustments TILT ADJUSTMENT Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust tilt tension knob NOTE: Once your TV is in place, tighten tilt tension knob to prevent unwanted movement.
Página 18
LEVEL ADJUSTMENT To adjust the leveling of your TV, loosen TV interface screw using hex key , level your TV, then tighten TV interface screw CAUTION: Avoid potential personal injuries and property damage! Screw must be installed to secure the TV onto arm assembly...
Página 19
REMOVING THE TV HEAVY! You may need assistance with this step. TO REMOVE THE ARM ASSEMBLY: Remove screws using hex key Disconnect the cables from your TV. Remove TV interface screw using hex key Carefully lift arm assembly up and off wall plate Carefully lift your TV up and off of arm assembly...
Página 20
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este soporte sea el ideal para sus necesidades. ¿Su televisor pesa más de 45,3 kg No — ¡Perfecto! 45,3 kg , incluidos (100 libras) Sí...
ESPAÑOL Dimensiones Ver página 3 Piezas y accesorios suministrados Ver página 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
ESPAÑOL Ver página 10 ÚNICAMENTE montantes de madera PASO 2A FIJAR LA PLACA MURAL PRECAUCIÓN: Evite lesiones y daños materiales. ● El yeso que recubre la pared no debe exceder los 16 mm (5/8''). ● Tamaño mínimo del montante de madera: común 51 mm x 102 mm (2'' x 4''); nominal 38 mm x 89 mm (1½'' x 3½''). ●...
ESPAÑOL PASO 3 Colgar el televisor en la placa mural Ver página 14 3-1 Fije el módulo del brazo a la placa mural Para colgar el brazo de la placa mural , primero enganche el soporte superior y luego apoye el brazo en su lugar.
Página 24
Thank you for choosing SANUS Accents! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: accents.sanus.com Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.