Manuales relacionados para Sanus accents SAN22BB
Resumen de contenidos para Sanus accents SAN22BB
- Página 1 SAN22BB INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for easy install video san.us/391...
- Página 2 IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! Does your TV weigh more than 80 lb (36.2 kg) including accessories? No — Perfect! 80 lb (36.2 kg) Yes —...
- Página 3 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 4 STEP 1 Parts and Hardware Cont. Washers Spacers Wall Plate Template M6/M8 M4/M5 M6/M8 Wall Plate STEP 2 Parts and Hardware Washers Lag Bolts Anchors 5⁄16 x 2¾ in. 5⁄16 in.
- Página 5 STEP 1 Attach TV Bracket to TV 1-2 Select TV Screw Length 1-1 Select TV Screw Diameter Hand thread screws into the threaded inserts If your TV has a flat back, use the shorter screws. on the back of your TV to determine which Spacers and longer screws are supplied to accommodate: screw diameter (M4, M5, M6, or...
- Página 6 1-3 Attach TV Bracket Ensure the brackets are level on the back of the TV. Install using either the short screw and washer, or long screw, spacer, and washer combination you selected for your TV. Washer and Short Screw Spacer, Washer, and Long Screw 11 12 03 04 05 06 07 08 09 10...
- Página 7 1-4 Adjust Straps For ease of access, straps should be level with the bottom of the TV.
- Página 8 STEP 2 Attach Wall Plate Wood Stud Option CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 16 mm (5/8 in.) ● Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1 1/2 x 3 1/2 in.) Locate your stud.
- Página 9 Drill pilot holes using a 5.5 mm (7/32 in.) diameter drill bit. Remove wall plate template. IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (7/32 in.). Install the wall plate using lag bolt and washers...
- Página 10 STEP 2 Attach Wall Plate Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! ● Mount the wall plate directly onto the concrete surface ● Minimum solid concrete thickness: 203 mm (8 in.) ● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.) ●...
- Página 11 Remove wall plate template and insert concrete anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install the wall plate using lag bolts and washers Tighten the lag bolts and washers only until they are pulled firmly against the wall plate.
- Página 12 STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. IMPORTANT: There is an audible click when the brackets are securely latched to the wall plate.
- Página 13 Adjust Tilt and Level If needed, adjust the screws on the TV brackets to level the TV.
- Página 14 Removing the TV HEAVY! You may need assistance with this step. To remove the TV from the wall plate, simultaneously pull release cords down and TV out, and then lift the TV up and out away from the wall.
- Página 15 Dimensions UP TO 15.75 [mm] 400.0 4.75 120.7 0.90 6.00 3.75 22.9 152.4 95.3 15.94 405.0 17.24 3.28 437.9 83.4 OFFSET 15.50 393.7...
- Página 16 ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este producto sea el ideal para sus necesidades. Ver página 2 1. ¿Su televisor pesa más de 36,2 kg (80 libras) incluyendo los accesorios? No —...
- Página 17 ESPAÑOL televisores con dorso irregular o redondeado, televisores con orificios de montaje intercalados y en caso de necesitar un espacio adicional para cables PRECAUCIÓN: VERIFIQUE QUE EL TORNILLO O LA COMBINACIÓN DE TORNILLO Y SEPARADOR ENROSQUEN CORRECTAMENTE. SI EL TORNILLO ES DEMASIADO CORTO, NO SOSTENDRÁ EL TELEVISOR. SI ES DEMASIADO LARGO, DAÑARÁ EL TELEVISOR. 1-3 Fijar la placa de sujeción del televisor Ver página 6 Asegúrese de que las placas de sujeción queden niveladas en la parte posterior del televisor.
- Página 18 ESPAÑOL Opción para bloque de hormigón Ver página 10 PRECAUCIÓN: Evite lesiones y daños materiales. ● Instale la placa mural directamente sobre la superficie de hormigón. ● Espesor mínimo del hormigón: 203 mm (8'') ● Tamaño mínimo del bloque de cemento: 203 x 203 x 406 mm (8'' x 8'' x 16'') ●...
- Página 19 ESPAÑOL Ajustar el televisor Ver página 13 Ajustar la inclinación Afloje las perillas que se encuentra en la placa de sujeción del televisor a fin de ajustar la inclinación de su televisor. Ajuste las perillas cuando su televisor tenga la inclinación deseada. Ajustar el nivel Si es necesario, ajuste un tornillo de las placas de sujeción del televisor al nivel del televisor Retirar el televisor...
- Página 20 Thank you for choosing Sanus Accents! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: accents.sanus.com Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.