Proctor Silex AC25 Manual De Instrucciones página 5

How to Brew Directly Into Thermal
Pot Liner
1. Preheat thermal pot liner with hot water as directed under
"How to Use" on page 4, steps 1 and 2.
2. Open lid and remove pump.
3. Position the thermal pot liner directly under the coffee
maker's brew basket. Follow manufacturer's instructions for
brewing coffee.
4. When brewing is complete, carefully remove from under brew
basket. Replace pump and close with tabs. Lower lid until it
clicks into place. Move ON/OFF dispensing lock to OFF. Use
the handle to move to next location.
Removing the Lid
1. Lift up on lid release and move
lid back until it rests in place.
2. Press on the lines on lid hinge with
one hand and pull lid straight up
with your other hand to remove.
Replacing the Lid
1. Insert lid hinge into the hinge holder.
2. Push straight down until you hear the
lid click. Move lid down to close.
5