Package Contents; Hardware Installation - Grandstream GWN7605 Guía De Instalación Rápida

Ocultar thumbs Ver también para GWN7605:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
OVERVIEW
EN
The GWN7605 is an affordable 802.11ac Wave-2 Wi-Fi access point ide-
al for small to medium wireless network deployments with medium user
density. It offers dual-band 2x2:2 MU-MIMO with beam-forming technol-
ogy and a sophisticated antenna design for maximum network through-
put and expanded Wi-Fi coverage range. To ensure easy installation and
management, the GWN7605 uses a controller-less distributed network
management design in which the controller is embedded within the prod-
uct's web user interface. The GWN7605 is also supported by GWN.Cloud
and GWN Manager, Grandstream's cloud and on-premise Wi-Fi manage-
ment platforms. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments
and offers a seamless connection with Grandstream's Wi-Fi-capable IP
phones. With support for advanced QoS, low-latency real-time applica-
tions, mesh networks, captive portals, 100+ concurrent clients per AP
and dual Gigabit network ports with PoE/PoE+, the GWN7605 is scalable
Wi-Fi solution for deployments such as retail locations, restaurants, small
offices and more.
PRECAUTIONS
Do not attempt to open, disassemble, or modify the device.
Do not expose this device to temperatures outside range of 0 °C to 40 °C for
operating and -10 °C to 60 °C for storage.
Do not expose the GWN7605 to environments outside of the following humid-
ity range: 10-90% RH (non-condensing).
Do not power cycle your GWN7605 during system boot up or firmware up-
grade. You may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

1x GWN7605
Access Point
3x Screw
(PM 3 x 50)
1x Ceiling
1x Mounting
Mounting Bracket
Bracket
3x Screw
3x Plastic
(PA 3.5 x 20)
Expansion Bolt
~1~
3x M3 NUT
1 x Quick Installation Guide
GWN7605 PORTS
Port
Description
NET/POE
Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET
Ethernet RJ45 port (10/100/1000Mbps) to your rout-
er or another GWN76xx.
RESET
Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7605
GWN7605 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7605.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7605 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch

Publicidad

Tabla de contenido
loading

Tabla de contenido