BSA INVICTA CONTA Manual De Instalación página 5

Setting the Language
Programming
Paragraph 1 – Manual Dosage
Programming
P R O G
C o n f i g u r a t i o n
P u m p F u n t i o n s
-­‐
+
P u m p
F u n c t i o n s
Display during Operation
Operating mode
Man = Manual
•
•
•
•
Paragraph 2 - Dosage Proportional to Signal 0/4-20
Programming
PROG
Configuration
Pump Funtions
-­‐
+
Pump
Functions
0/4 - 20 mA
0/4 - 20 mA
-­‐
Low 4.0mA
0/4 - 20 mA
High 20.0mA
-­‐
EM00136204
The pump operates in constant mode. The flow can only be manually
regulated by pressing the
the flow, or the
MAN
Stop P100%
Pump status
Empty = pump in start
Stop = pump stationary
Paus = pump in pause
The pump proportionally doses at a signal of (0)4-20 mA. On the basis of
the factory settings, the pump interrupts dosage at 4mA and doses at the
maximum set frequency when it receives 20 mA. These two values can be
modified during programming. The maximum frequency can be modified
during operation, by pressing the
-­‐
+
increase the flow, or the
-­‐
+
Makes it possible to select the language. The pump is set in
English in the factory.
Changes can be made by pressing the
using the
to confirm and return to the main menu
Current dosage speed
(depends on selected unit of
measurement)
Percentage, Frequency,
•
l/h, Gph, ml/m
rev. 2.1
Operation
keys to set the new value. Press
Operation
keys at the same time to increase
keys to decrease it.
Display during Setting (MODE key)
Operating mode
•
Man (during manual modification of the
flow it displays the corresponding
frequency value)
MAN
Current dosage value
•
Modify the maximum flow by pressing the
+ or – keys at the same time
Operation
keys at the same time to
keys to decrease it.
key, then
P100%
3