Power Button; Your Scooter - Pride iRIDE S25 El Manual Del Propietario

TILLER CONSOLE
The tiller console houses all controls needed to drive your scooter, including the battery condition meter, tiller
display, and twist throttle. See figure 11.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller console
has dried thoroughly.
9
Figure 11. Tiller Console

Power Button

„ Push power button on battery pack to turn your scooter on. The power button also acts as the main circuit
breaker. See figure 12.
Twist Throttle
The twist throttle allows you to control the forward speed of your scooter.
„ Place your right hand on the right handgrip and your left hand on the left handgrip.
„ Use your right thumb to press the twist throttle control downward in order to control speed of forward movement.
„ To slow your scooter, apply the handbrake.
„ When the twist throttle is released, it automatically returns to the "stop" position.
Mode Select Button
Allows you to toggle through modes and illuminate the LCD display.
„ Press and hold the top portion of the mode select button for two seconds to illuminate the LCD display.
„ Press the bottom portion of the mode select button to toggle through the available modes. From the drive
profile mode, press + or - to cycle through the available drive profiles.
iRIDE
I I . Y O U R S C O O T E R
IDENTIFICATION KEY
1. Handbrake Lever
2. Tiller Display
3. Speed Up Button
4. Mode Select Button
5. Hand Grip
1
6. LCD Display
7. Speed Down Button
8. Twist Throttle
9. Parking Brake Pin
3
2
4
6
7
8
5
21