PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes
No Tools Required for Assembly
ASSEMBLY INSTRUCTIONS
1. Place basin (B) on a flat, level surface. Route power
cord of pump (power cord with rubber cap) through the
pipe on basin (B) to the bottom of basin (B). Gently pull
the plug out through the small notch on basin (B).
2. Pull out power cord of LED light from the vase (A)
and plug the end into the end of the power cord from
the pump (C). Screw the preassembled ring over the
cable to secure the connection.
3. Pull out the water tube from the vase (A) and connect
it to the outlet nozzle on the pump (C). Make sure the
water tube connects tightly to the nozzle. Place the
pump into the chamber on the basin (B).
1
2
3
A
A
4
C
B
B
C
Power
cord
Water
C
Tube
B